Trailer LED Light KIT Utility RV Boat 12V Stop Turn Tail Side Marker

Rear Led Submersible Trailer Tail Lights Kit Boat Marker Truck Waterproof New Style: 25ft Long Trailer Light Wire 25’ Long Trailer Light Wire 4 wire flat trailer light extension 25’ Wiring harness with male and female 4 pole connectors Style：4" Round Truck Tail Light Specification： Color: Red Voltage: 12V Number of Bulb: 2 X 12 LED Material: ABS+PC+Rubber Waterproof rate: IP67 Outer Diameter: 130mm/5.1 inch Inner Diameter: 105mm/4.1 inch Function: Stop/ Turn/ Tail Light/ Backup Reverse light Placement on Vehicle: Front/Rear, Left/Right Suitable model: Universal for Trucks, trailers, tractors, semi-trailer, Dump Truck, bus, boat, special vehicle, and etc. Fits for heavy duty trucks like Peterbilt, freightliner, international ,Kenworth, mack, and so on Wire Connection: Black wire : low brightness (red) Red wire : high brightness (red) White wire : negative pole Features: *High brightness: Each led light has 12 high quality LEDs to output a super bright light, which sealed with a rubber grommet. *Superior material: Durable PC lens with rubber grommet housing welded together to ensure a permanent and water-proof seal. *Waterproof: The tail light is highly silicon sealed with an IP67 waterproof rating, which works even under extreme conditions such as rain and snow. *Easy to install: Come with rubber grommet & plug,drilling and hardwiring are not required *Wide application: Compatible for trucks, trailers, tractors, semi-trailer, Dump Truck, bus, boat, special vehicle, and etc. Fits for heavy duty trucks like Peterbilt, freightliner, international ,Kenworth, mack, and so on Package Include 2x 4inch 12 LED Round Tail Lights Style： 6" Oval Trailer Lights Features Black rubber grommet for easy surface mount setup. Advanced LEDs draw less current and much brighter than incandescent bulbs. Compatible with most 12V vehicles such as trailers, tractors, trucks, RV, camper, bus, boat, UTV, etc. Lower consumption and power saving, ensures long-term use for your vehicles. Meets all applicable DOT/SAE standards and fit standard trailer light mounting position 10 LED super diodes for each light. grommet fits standard mounting position​ Specifications Size: 2-5/16" x 6-7/16" oval, 1" thick (1-3/4" thick at wiring connection). Hole size: 2-1/2" x 6-3/4" LED Type: High quality SMD LED Color: Super bright red Working Voltage: 12V DC Waterproof rate: IP67 Output high and low brightness: high brightness work as turn/brake light, and low brightness work as tail light Applications Compatible with trucks, trailers, tractors, semi-trailer, dump truck, bus, boat, Heavy duty trucks tractors like Peterbilt, freightliner, international, Kenworth, Mack, Western Star,Volvo,Paccar etc. Package Includes: 2 x LED Trailer Lights 2 x Oval Rubber Grommet 2 x 3-pin water tight plug with wires Style： 8.6" square Trailer Lights Product Features: 1. Streetside has LEDs including the license plate illumination 2. Curbside has LEDs 3. Lens Color: Red 4. Stop, Tail, and Turn functions 5. Complies with DOT standards; Side lens are with standard bulb 6. Convert your old incandescent lights to more modern LED's 7. LED's are brighter and light faster, draw less current and generate less heat than incandescent lights 8. Sealed, waterproof construction 9. Included: Left+Right/Screws . Designed for marine trailer applications Size: 21x7x7cm/8.25x2.75x2.75in Material: PC+ Electronic Components Power Wire Length: 20cm/7.8in Notice: This product is not including License Plate Bracket, Wires, hardware, etc. Package List: 2 x Trailer Lights(L/R) 4X Reflective Tape 4X screws Style： Tail Lights Kit Set Description: 100% Brand New Rear Led Submersible Trailer Tail Lights Kit Boat Marker Truck Round Waterproof for trailers under 80 inches in width Kit includes stop, tail and turn signal lights, two amber clearance lights and wiring harness Includes 22 and 4 foot 4-pole color coded wiring harness High visibility LED taillights last longer than standard incandescent lights Complies with DOT standards; Side lens are with standard bulb Improved 22 gauge all-copper wiring harness with UV coated jackets will last longer than copper coated aluminum wires Includes parts pack with Installation Instruction ,all fasteners and connectors needed for installation. Ideal for towing applications up to 80" wide Waterproof Level: IP67 Notice: 1.Must be Used Under 12V Voltage, If It Exceeds 12V, It May Burn The Product 2.Professional Installation is Highly RecommendedList Package List: 1 x Trailer Tail Lights Kit 1 x Installation Instruction Style： 9pcs Tail Lights Kit This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once; This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar; Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights); white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5" led trailer light bar); white is ground andblack is positive(mini side marker lights); Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 white led) illuminates license plate; 15" LED trailer tail light bar with 11 LEDs provides stop, tail, and turn functions and surface mounts to trailer; 2.5" Rectangular LED mini trailer light has 2 led diodes each to provides marker/clearance lights; Warranty and Waterproof: The led trailer wiring lights kit is completely sealed, which means no water can enter inside to damage the circuit board. Package Include 1 pcs Left hand tail light 1 pcs Right hand tail light 1 pcs 25 feet wiring harness with 4-pole connector 4 pcs LED Amber surface mount marker clearance lights 2 pcs LED Red surface mount marker clearance lights 1 pcs 15.5" 11 LED Trailer Tail Light Bar square led tail lights square led tail lights(driver and passanger side) Square combination tail lights serve 7 functions when properly mounted on trailers under 80" wide: Stop, turn, tail, side marker, side reflector, rear reflector, and license plate light Built-in license plate light on driver's side light Style： square Trailer Lights set HALO Trailer Light Kit : Trailer tail light kits has everything you need, includes two stop turn LED tail lights(Unique halo glow and solid light pattern design, different from other trailer taillights on the market), two amber clearance lights, one 22 feet and one 4 feet wiring harness, license plate bracket, 4pcs complimentary reflective sticker. IP68 Waterproof and Submersible: There is no screw on the lamp shade , the LED trailer lights are completely welded together, The circuit board of tail light is seal. A drain hole is designed to pull out all the water. This is to guarantee that water will not damage the diodes or circuit board. excellent tightness makes it be definitely waterproof and submersible.Please install the trailer taillights with the drain hole downwards. Compliant with DOT approved standards: The lamp shade of utility trailer light kit with corrosion resistant ABS material, 100% compliant with DOT approved standards 25ft wiring harness have more durable than the traditional copper coated aluminum wires and split Y-style color coded harness. Fully operable in inclement weather, these trailer lights are tough and durable for the long term. Widely Used: Widely applicable to 80 Inch width tractor, such as truck, trailer, boat, bus, lorry, van, caravan, snowmobile, etc. Please make sure wires connect correctly and no electronic short before underwater. › See more product details Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing. Upgrade Tail Lights Kit Set Description: 100% Brand New Rear Led Submersible Trailer Tail Lights Kit Boat Marker Truck Round Waterproof for trailers under 80 inches in width Kit includes stop, tail and turn signal lights, two amber clearance lights and wiring harness Includes 22 and 4 foot 4-pole color coded wiring harness High visibility LED taillights last longer than standard incandescent lights Complies with DOT standards; Side lens are with standard bulb Improved 22 gauge all-copper wiring harness with UV coated jackets will last longer than copper coated aluminum wires Includes parts pack with Installation Instruction ,all fasteners and connectors needed for installation. Ideal for towing applications up to 80" wide Waterproof Level: IP67 Notice: 1.Must be Used Under 12V Voltage, If It Exceeds 12V, It May Burn The Product 2.Professional Installation is Highly RecommendedList Package List: 1 x Trailer Tail Lights Kit 1 x Installation Instruction

Returns Accepted for this item if it's within 30 Days