3D-GEM Supra Rear Marker Vents-CelicaXX-MA60, MA61,MA67,A60 3D

82 83 84 85 Celica and Supra Rear JDM "Vented" Side Markers - 1 pair -  Hard to find 3D Printed Includes: 1) Driver and Passenger side rear marker vents. 2) Installation hardware - specific to the GEM design. Notes: - Internal Vents not included in this ad. These will not flow any air. (New ad coming soon that will flow air, and have the lights WITH internal ducting.) - Professional installation only. - Gaskets are not included. - ASA BLACK - Better UV and higher temps than ABS, PETG, and PLA Custom GEM design. These are designed from scratch to represent the original version as close as possible. Updates and changes to improve the product may differ from the pictures. "Fits" A60, RA61 liftback, RA65 liftback, MA60, MA61, MA67 hatchback versions and possibly others. Please check your application. Should fit 1982, 1983, 1984, 1985 and early 1986 models. As 3D printing is a different manufacturing method, these are NOT an exact injection molded parts, but a very close design and the resulting part is very nice quality with minimal variation. High resolution. NOT DOT approved. Off-road/track use only. Finish These rear marker vents will be provided already lightly sanded and acetoned for a smoother glossier look similar to the finish shown in the pictures. These parts can be further sanded and painted to reduce and possibly eliminate the layer lines all together with enough time and care. Or you can acetone wash to a smooth finish. If the part turns a little white after an acetone wipe, you can put in an acetone chamber for a duration of time which it will go away. Time is dependent on the temperature. As little as 5 minutes or less in higher temps, and 2-3 hours in lower temps. If its in the chamber to long, the part will be soft and deform. Be conservative and exercise caution. It is up to the buyer to exercise caution with dangerous chemicals and ignition sources. Please check the MSDS on acetone and wear proper safety gear. Do not use an open flame near parts that have been recently acetoned. Please research how to properly acetone ABS/ASA parts before proceeding. No returns. 3D printed parts are each inspected and cleaned as much as possible. However, in some cases minor trimming or a quick touch up might be required. Parts are processed as quickly as possible but may take up to 1 week for shipment in rare cases. Additional longevity can be had by painting the parts. Be careful not to paint the LEDs. We recommend an ASA safe cleaner/degreaser, plastic primer and then finish coats.
Celica Supra Rear Marker Vents - Celica XX - MA60, MA61, MA67, A60 liftback versions 3D printed Made in the USA by an American company. International shipments are through the Ebay.com Global Shipping program for the noted locations and GEM responsibility ends once dropped off at the respective shipping location. Please understand how the Ebay.com forwarding works for international shipments and understand that delivery times will be longer and are not related to the times stated in this ad. (We do try to ship asap.) Additional duties, taxes, and freight charges are the responsibility of the buyer. If you have a part that is hard to find, expensive, and/or suitable for 3D printing, please send us a message. This part is not in anyway affiliated with the other manufacturer(s) mentioned and is no way one of their products.

Returns Accepted for this item if it's within 30 Days